Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 189)

Cannot Connect the Scanner and a Computer via a USB Cable
Check the following points
● Did you select [Automatic] for the USB setting for the scanner? (page 189)
If the problem persists, check the items in Before You Contact the Scanner Service Provider (page 217)
first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Did you select [Automatic] for the USB setting for the scanner?
Solution
If you select [Automatic] for the USB setting for the scanner, the connection between the scanner and a
computer may not be able to be established.
Change the USB setting for the scanner to [USB 2.0] in the following procedure:
1 On the touch screen, press → [Scanner Settings] → [USB].
2 Select [USB 2.0].
Troubleshooting
189