Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 226)

Scanner Name
Scanner name
Set a scanner name.
Enter a scanner name within 64 characters.
The following characters can be used for a scanner name:
● Alphanumerical characters
● Hyphen "-"
● Underscore "_"
● Space
The space before or after the character string is ignored.
Scanner Code
Scanner Code
Specify whether or not to issue a scanner code.
If the "PaperStream NX Manager" setting is enabled, a scanner code can be used when scanning with a
user application on a computer or mobile device.
Enable
[Enable] is set to off as the factory default.
When [Enable] is set to on, make sure you enter characters for [Code].
Code
Enter a code within 64 characters.
All characters that are available on the touch screen on the scanner can be used.
The space before or after the character string is ignored.
Scanner Settings (Touch Screen)
226