Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner - Manual (Page 49)

8 Connect the scanner to the computer by using the bundled USB cable.
9 Check whether the scanner is ready to start scanning.
For details, refer to
How to Perform a Basic Scan (page 68) .
ATTENTION
To change the scanner settings, the administrator password is required. The default password is "password".
Change the administrator password to prevent the settings from being changed by other users.
Also, change the administrator password regularly.
The administrator password can be changed in the screen that appears in the following procedure:
→ [Scanner Settings] → [Admin Password]
Scanner Setup
49