Scanning does not start – Fujitsu Ricoh Fujitsu fi-7300NX Color Duplex Document Scanner User Manual
Page 195
Scanning Does Not Start
Check the following points
●
Is the document loaded in the ADF paper chute (feeder) correctly? (page 195)
●
Is the ADF closed properly? (page 195)
●
Are the scanner and the computer properly connected? (page 195)
If the problem persists, check the items in
Before You Contact the Scanner Service Provider (page 217)
first, then contact the distributor/dealer where you purchased this product. Refer to the contact
information in the Contact List if supplied with this product, or refer to the contact information in the
Contact for Inquiries section if provided in Safety Precautions supplied with this product, and then make an
inquiry.
●
Is the document loaded in the ADF paper chute (feeder) correctly?
Solution
Reload the document in the ADF paper chute (feeder).
●
Is the ADF closed properly?
Solution
Close the ADF firmly.
If the document is caught in the ADF, remove the document and close the ADF.
●
Are the scanner and the computer properly connected?
Solution
●
For Wi-Fi
Connect the scanner and the computer via Wi-Fi. When you cannot connect them via Wi-Fi, refer to
Cannot Connect the Scanner and a Computer via Wi-Fi (page 169)
●
For a wired LAN
Connect the scanner and the computer via a wired LAN. When you cannot connect them via a wired LAN,
refer to
Cannot Connect the Scanner and a Computer via a Wired LAN (page 184)
.
●
For USB
Connect the USB cable properly. For details, refer to
When Connecting the Scanner to the Computer via a
Troubleshooting
195