Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 115)

MultiVOIP User Guide Software Installation
115
8. A completion screen will appear.
Click Finish.
9. When setup of the MultiVOIP software is complete, you will be prompted to
run the MultiVOIP software to configure the VOIP.
Software installation is complete at this point. You may proceed with
Technical Configuration now or not, at your convenience.
Technical Configuration instructions are in the next two chapters of this
manual: Chapter 5 for T1/E1 MultiVOIP units and Chapter 6 for Analog
MultiVOIP units.