Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 506)

Embedded Gatekeeper MultiVOIP User Guide
506
Network Parameter Definitions (cont’d)
Field Name Values Description
Call Proceeding This parameter group pertains to the
gatekeeper’s handling of Q.931 “call-
proceeding” messages.
Send
Immediately Y/N Immediate return of call-proceeding
message to originating endpoint. When
selected, the gatekeeper will send the
Q.931 call –proceeding message to the
originating endpoint immediately after
receiving that endpoint’s call setup
request.
With H.245
Addr Y/N When enabled, gatekeeper supplementary
services will remove the H.245 address
from the outgoing setup in order to
prevent early H.245 establishment to the
call’s destination. This destination can be
changed during Forward on Busy or
during Forward on No Response (CFNR).
After
Overlapped
Sending Y/N Delayed return of call-proceeding
message to originating endpoint. When
selected (in routed mode), the gatekeeper
will send a Q.931 call-proceeding
message to the originating endpoint after
it receives a return call-proceeding
message back from the destination
endpoint.