Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 442)

Operation & Maintenance MultiVOIP User Guide
442
The initial configuration step of assigning the voip unit an IP address must still
be done locally using the Windows GUI. However, all additional
configuration can be done via the web GUI.
The content and organization of the web GUI is directly parallel to the
Windows GUI. For each screen in the Windows GUI, there is a corresponding
screen in the web GUI. The fields on each screen are the same, as well.
The Windows GUI gives access to commands via icons and pulldown menus
whereas the web GUI does not.
The web GUI, however, cannot perform logging in the same direct mode done
in the Windows GUI. However, when the web GUI is used, logging can be
done by email (SMTP).