Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 539)

MultiVOIP User Guide Cable Pinouts
539
ISDN BRI RJ-45 Pinout Information
The S/T interface uses an 8-conductor modular cable terminated with an 8-pin
RJ-45 plug. An 8-pin RJ-45 jack located on the terminal is used to connect the
terminal to the DSL (Digital Subscriber Loops) using this modular cable.
The table below shows the Pin Number, Terminal Pin Signal Name and
Network Pin Signal name for the S/T interface.
Pin TE Signal NT Signal Pin
1 Not used Not used 1
2 Not used Not used 2
3 Tx+ Rx+ 3
4 Rx- Tx- 4
5 Rx+ Tx+ 5
6 Tx- Rx- 6
7 Not used Not used 7
8 Not used Not used 8
1 2 3 4 5 6 7 8
TE=Terminal Equipment
NT=Network