Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 493)

MultiVOIP User Guide Embedded Gatekeeper
493
Existing Endpoints Parameter Definitions
Field Name Values Description
Type Gatekeeper,
Gateway,
MCU,
Terminal,
or
Undefined. The endpoint type . When an endpoint
attempts to register with the Gatekeeper, the
Gatekeeper compares the endpoint type with
the predefined value. If the Gatekeeper detects
a discrepancy, the registration is not accepted.
If you are not sure of the endpoint type, select
Undefined, which allows any endpoint of any
type to register with the Gatekeeper.
(Multipoint Control Units, MCUs, are used to
facilitate conference calls.)
Online +
or
[blank]
When “+” appears, the endpoint’s registration
is dynamic or “online.”
PreDef +
or
[blank]
When “+” appears, the endpoint’s registration
is static or “predefined.”
Registration
IP n.n.n.n
0-255 The RAS address and RAS port of the
endpoint.
Name The H.323 ID alias of the endpoint.
Phone The e164 alias number (conventional PSTN
phone number)of the endpoint.
Other Aliases Additional aliases for the endpoint: URL, e-mail
address, transport address, party.address, or
private network number (per ISO/IEC 11571).
Alias addresses must be unique within a zone.
Gatekeepers themselves cannot have aliases.
Msg LRQ,
RRQ,
URQ, or
AppURQ
The type of message sent by the endpoint when
the mode for processing registration is manual.
This can be an LRQ, RRQ, URQ, or AppURQ
(which is a URQ sent by the Gatekeeper).).).
TTL seconds The time remaining in seconds before the
TimeToLive timer expires. If the endpoint fails
to reregister within this time, the endpoint is
unregistered.