Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 476)

Embedded Gatekeeper MultiVOIP User Guide
476
18. MVP2410 . Save the MVP2410 PhoneBook Configuration (the Save Setup
command is in the sidebar menu).
19. MVP410G . The gatekeeper Online Parameters screen (go to Gatekeeper |
Endpoints and click the “Online Parameters” button) for the Mucksville
MVP2410 shows a useful summary of system capabilities and denotes those
that have been enabled for the MVP2410 in particular.
Mucksville MVP2410 MultiVOIP: its gatekeeper Online Parameters
(as seen in the Compton MVP410G’s MultiVOIP software display)
“allowed” services are system-wide … whereas … “supported” services are those that
are active in that particular voip endpoint
The gatekeeper will route calls to an endpoint only if the service (dialing
pattern) is supported by that endpoint. (Services may be “allowed” in the
system but not “supported” by an endpoint.)
“GK Allowed Services” are the set of all services (roughly the equivalent of
destination patterns in phonebooks) used in the voip system that the
embedded gatekeeper is overseeing. “GK Supported Services” are all
services (destination patterns) that direct calls to the MVP2410 gateway.
20. Calls . We will now consider examples of different types of voip calls that
can be made within the system. We dial a sequence, complete the call, and
then look at the
Call Progress screen of the voip unit at which the call is
completed.