Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 359)

MultiVOIP User Guide E1 PhoneBook Configuration
359
Phone Book for Analog VOIP Host Unit (Site B)
(continued)
VOIP Dir #
-OR-
Destination
Pattern IP Address Channel Comments
0207
xxx
xxxx 200.2.9.9 0
(Note 2.) Gives remote voip users
access to phone numbers in
0207 area code (Inner
London) in which Site D is
located.
0208
xxx
xxxx 200.2.9.9 0
(Note 2.) Gives remote voip users
access to phone numbers in
0208 area code (Outer
London) for which calls are
local from Site D (Inner
London).
Note 1. The “x” is a wildcard character.
Note 2. By specifying “Channel 0,” we instruct the MVP3010 to
choose any available data channel to carry the call.
Note 3. Note that Site F key system has only 30 extensions (x7400-
7429). This destination pattern (018226374) actually directs calls to
402-263-7430 through
402-263-7499 into the key system, as well.
This means that such calls, which belong on the PSTN, cannot be
completed. In some cases, this might be inconsequential because an
entire exchange (fully used or not) might have been reserved for the
company or it might be unnecessary to reach those numbers. However,
to specify only the 30 lines actually used by the key system, the
destination pattern 018226374 would have to be replaced by three other
destination patterns, namely 0182263740, 0182263741, and
0182263742. In this way, calls to 0182-263-7430 through 0182-263-
7499 would be properly directed to the PSTN. In the Site D outbound
phonebook, the 30 lines are defined exactly, that is, without making any
adjacent phone numbers unreachable through the voip system.