Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 470)

Embedded Gatekeeper MultiVOIP User Guide
470
14. MVP2410 . The required MVP2410 phonebook configuration is shown
below. We are presuming here that technical configuration is already
complete so that the MVP2410’s IP address and other technical
configuration parameters have already been duly set.
“Mucksville” MVP2410 Gateway Functions and Settings
Function PhBk Config
Scn Settings
1
Inbound PhoneBook
Screen Settings Phone User’s
Actions
Put MVP2410
under control of
gatekeeper Gatekeeper IP
Address =
192.168.80.12 -- --
Give remote
users access to
Mucksville
office PBX
extensions Gateway
Prefix = 7 Remove Prefix = 7;
Add Prefix = 7 Dial 4 digits
beginning with
“7”
Give remote
users access to
Mucksville area
PSTN Gateway
H.323 ID
= 79 Remove Prefix = 79;
Add Prefix= 9 Dial “79” plus
Mucksville
local number
Outbound PhoneBook
Screen Settings
3
Get access to
Compton
factory PBX
extensions Destination Pattern = 5
RemovePrefix = 5
Select “Use GateKeeper”
Gateway H.323ID = none
Gateway Prefix = 5 Dial 4 digits
beginning with
“5”
Get access to
Compton area
PSTN Destination Pattern = 59
RemovePrefix = none
Select “Use GateKeeper”
Gateway H.323ID = 59
Gateway Prefix = none Dial “59” plus
Compton local
number
Get access to
Rootersville
office phone -- Destination Pattern = 6000
RemovePrefix = none
Select “Use GateKeeper”
Gateway H.323ID = 6000
Gateway Prefix = none Dial 6000.
Get access to
Rootersville
area PSTN --
1. “PhoneBook Configuration
screen settings”
Destination Pattern = 6
RemovePrefix = none
Select “Use GateKeeper”
Gateway H.323ID = 6
Gateway Prefix = none Dial “6”.
Dial R’ville
local phone
number.