Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 227)

MultiVOIP User Guide Technical Configuration (Analog/BRI)
227
FXS Ground Start Parameters (not supported). The parameters applicable
to FXS Ground Start are shown in the figure below and described in the table
that follows.
FXS Ground Start Interface: Parameter Definitions
Field Name Values Description
FXS Ground
Start Y/N Enables FXS Loop Start interface
type.
Inter Digit
Timer integer values
in seconds This is the length of time that the
MultiVOIP will wait between
digits. When the time expires, the
MultiVOIP will look in the
phonebook for the number entered.
Default = 2.