Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 264)

Technical Configuration (Analog/BRI) MultiVOIP User Guide
264
The Supplementary Services fields are described in the tables below.
Supplementary Services Parameter Definitions
(Not supported in BRI 5.02c software.)
Field Name Values Description
Select
Channel 1-2 (210);
1-4 (410);
1-8 (810) The channel to be configured is selected
here.
Call Transfer
Enable Y/N Select to enable the Call Transfer function
in the voip unit.
This is a “blind” transfer and the sequence
of events is as follows:
Callers A and B are having a
conversation.
Caller A wants to put B into contact with
C.
Caller A dials call transfer sequence.
Caller A hears dial tone and dials number
for caller C.
Caller A gets disconnected while Caller B
gets connected to caller C.
Transfer
Sequence any phone
keypad
character The numbers and/or symbols that the
caller must press on the phone keypad to
initiate a call transfer.
The call-transfer sequence can be 1 to 4
characters in length using any
combination of digits or characters
(* or #).
The sequences for call transfer, call hold,
and call waiting can be from 1 to 4 digits
in length consisting of any combination
of digits 1234567890*#.