Multi-Tech Systems MULTIVOIP MVP-2410 User Manual
Page 507
MultiVOIP User Guide
Embedded Gatekeeper
507
Network Parameter Definitions (cont’d)
Field Name
Values
Description
Call Mode
Direct Mode
Sets the call mode to direct. In this mode,
terminals send ARQ messages to the
Gatekeeper, but pass the call signaling
and media control signaling directly
between them.
Routed Mode
Sets the call mode to routed. In this mode,
terminals pass admission requests and call
signaling through the Gatekeeper. Media
control information is sent directly
between the terminals.
Note: Though direct calls consume fewer
Gatekeeper resources, call control is
better for indirect (or routed) calls.
Configuration
Parameters
Max Number
of Calls
The maximum number of concurrent calls
allowed in the zone. This number can be
increased up to 100, in increments of 20,
by purchasing additional concurrent call
licenses.
Max Total
BW (KBps)
The amount of bandwidth in Kbps that
call traffic can consume at any given time.