Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 533)

MultiVOIP User Guide T1/E1 Expansion Cards
533
Power Cable
Molex Connector
Figure A-2: MVP2410/3010 Chassis (top/rear view)
4. While keeping the power cable out of the way, fit the MVP24-48 or
MVP30-60 card into the grooves of the expansion slot. Push it in far enough to
allow connection of the power cable to the receptacle on the vertical plate of
the expansion card. (See Figure A-2.) Connect the power cable.
5. Push the expansion card fully into the chassis. See Figure A-3.
Figure A-3: Sliding Expansion Card into Chassis
Secure the vertical plate of the expansion card to the chassis with a screw.