Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 424)

Operation & Maintenance MultiVOIP User Guide
424
Setting a Password (Windows GUI)
After a user name has been designated and a password has been set, that
password is required to gain access to any functionality of the MultiVOIP
software. Only one user name and password can be assigned to a voip unit.
The user name will be required when communicating with the MultiVOIP via
the web browser GUI.
NOTE: Record your user name and password in a safe place. If the
password is lost, forgotten, or unretrievable, the user must
contact MultiTech Tech Support in order to resume use of the
MultiVOIP unit.
1. The MultiVoip configuration program must be off when invoking the Set
Password command. If it is on, the command will not work.
2. To invoke the Set Password command, go to Start | Programs | MVP____
x.xx | Set Password.
3. You will be prompted to confirm that you want to establish a password,
which will entail rebooting the MultiVOIP (which is done automatically).
Click OK to proceed with establishing a password.