Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 220)

Technical Configuration (Analog/BRI) MultiVOIP User Guide
220
Voice/Fax Parameter Definitions (cont’d) )
Field Name Values Description
Dynamic Jitter
Dynamic
Jitter Buffer Dynamic Jitter defines a minimum and
a maximum jitter value for voice
communications. When receiving voice
packets from a remote
MultiVOIP ,
varying delays between packets may
occur due to network traffic problems.
This is called Jitter. To compensate, the
MultiVOIP uses a Dynamic Jitter
Buffer. The Jitter Buffer enables the
MultiVOIP to wait for delayed voice
packets by automatically adjusting the
length of the Jitter Buffer between
configurable minimum and maximum
values. An Optimization Factor
adjustment controls how quickly the
length of the Jitter Buffer is increased
when jitter increases on the network.
The length of the jitter buffer directly
effects the voice delay between
MultiVOIP gateways.
Minimum
Jitter Value 60 to 400
ms The minimum dynamic jitter buffer of
60 milliseconds is the minimum delay
that would be acceptable over a low
jitter network.
Default = 150 msec