Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 310)

T1 Phonebook Configuration MultiVOIP User Guide
310
Note 1. The “x” is a wildcard character.
Note 2. By specifying “Channel 0,” we instruct the
MVP2400/2410 to choose any available data channel to
carry the call.
Note 3. Note that Site F key system has only 30 extensions
(x7400-7429). This destination pattern (140226374)
actually directs calls to 402-263-7430 through
402-263-7499 into the key system, as well.
This means that such calls, which belong on the PSTN,
cannot be completed. In some cases, this might be
inconsequential because an entire exchange (fully used
or not) might have been reserved for the company or it
might be unnecessary to reach those numbers. However,
to specify only the 30 lines actually used by the key
system, the destination pattern 140226374 would have to
be replaced by three other destination patterns, namely
1402263740, 1402263741, and 1402263742. In this
way, calls to 402-263-7430 through 402-263-7499
would be properly directed to the PSTN. In the Site D
outbound phonebook, the 30 lines are defined exactly,
that is, without making any adjacent phone numbers
unreachable through the voip system.