Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 432)

Operation & Maintenance MultiVOIP User Guide
432
To transfer files using the FTP server functionality in the MultiVOIP, follow
these directions.
1. Establish Network Connection and IP Addresses. Both the controller PC
and the MultiVOIP unit(s) must be connected to the same IP network. An IP
address must be assigned for each.
IP Address of Control PC ____ . ____ . ____ . ____
IP Address of voip unit #1 ____ . ____ . ____ . ____
:
.
:
.
:
.
:
.
:
.
IP address of voip unit #n ____ . ____ . ____ . ____
2. Establish User Name and Password. You must establish a user name and
(optionally) a password for contacting the voip over the IP network. (When
connection is made via a local serial connection between the PC and the voip
unit, no user name is needed.)
As shown above, the username and password can be set in the web GUI as well
as in the Windows GUI.