Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 549)

MultiVOIP User Guide Call States/Reasons
549
Call States and Call Reasons
MultiVOIP units with embedded gatekeeper functionality track call states and
the reasons for those states. We present here a complete listing of these call
states and call reasons. These relate to the
Call Details screen, which is a
secondary screen that can be launched from the Calls (“Current Calls”) screen
of the embedded gatekeeper software.
Possible Call States of which the Embedded
Gatekeeper Software can be notified
No State Description
1 Wait Orig Admission Needs application approval for sending an
ACF to the origin.
2 Wait NW Setup Waits for the Setup message to arrive after
sending an ACF back to the origin.
3 Wait Dest Admission Needs application approval for sending an
ACF to the Destination.
4 Wait NW Connect Waits for the Connect message to arrive
after sending an ACF back to the
destination.
5 Wait Dest Connect Needs application approval for Connecting
the destination to the origin.
6 Connect Sent To Orig The Gatekeeper passed the Connect
message of the destination back to the
origin.
7 Setup Arrived A Setup message is received from the
network.
8 Wait Orig Offering Needs application approval before sending a
Setup message from the originator of the
call to the destination.
9 Wait LRQ Needs application approval to do an LRQ
for the call.
10 Sending LRQ A notification is given for each outgoing
LRQ.