Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 225)

MultiVOIP User Guide Technical Configuration (Analog/BRI)
225
FXS Loop Start Parameters. The parameters applicable to FXS Loop Start
are shown in the figure below and described in the table that follows.
FXS Loop Start Interface: Parameter Definitions
Field Name Values Description
FXS Loop Start Y/N Enables FXS Loop Start interface
type.
Inter Digit
Timer integer values
in seconds This is the length of time that the
MultiVOIP will wait between
digits. When the time expires, the
MultiVOIP will look in the
phonebook for the number entered.
Default = 2.