Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 292)

T1 Phonebook Configuration MultiVOIP User Guide
292
The fields of the Add/Edit Outbound Phone Book screen are described in the
table below.
Add/Edit Outbound Phone Book: Field Definitions
Field Name Values Description
Destination
Pattern prefixes,
area codes,
exchanges,
line numbers,
extensions Defines the beginning of dialing
sequences for calls that will be
connected to another VOIP in
the system. Numbers beginning
with these sequences are
diverted from the PTSN and
carried on Internet or other IP
network.
Total Digits as needed number of digits the phone user
must dial to reach specified
destination
Remove Prefix dialed digits portion of dialed number to be
removed before completing call
to destination
Add Prefix dialed digits digits to be added before
completing call to destination
IP Address n.n.n.n
for
n = 0-255 the IP address to which the call
will be directed if it begins with
the destination pattern given
Description alpha-numeric Describes the facility or
geographical location at which
the call will be completed.
Protocol Type SIP or H.323
or SPP Indicates protocol to be used in
outbound transmission. Single
Port Protocol (SPP) is a non-
standard protocol designed by
Multi-Tech.