Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 259)

MultiVOIP User Guide Technical Configuration (Analog/BRI)
259
“Logs” Screen Definitions
Field Name Values Description
Enable Console
Messages Y/N Allows MultiVOIP debugging messages to be read
via a basic terminal program like HyperTerminal
™ or equivalent. Normally, this should be
disabled because it uses MultiVOIP processing
resources. Console messages are meant for tech
support personnel.
Filters (button) Click to access secondary screen on where console
messages can be included/excluded by category
and on a per-channel basis. (See the Console
Messages Filter Settings screen on subsequent
page.) Not supported in BRI 5.02c software.
Turn Off Logs Y/N Check to disable log-reporting function. Not
supported in BRI 5.02c software.
Logs Buttons Only one of these three log reporting methods,
GUI, SMTP, or SNMP, may be chosen.
GUI Y/N User must view logs at the MultiVOIP
configuration program.
SNMP Y/N Log messages will be delivered to the
MultiVoipManager application program.
SMTP Y/N Log messages will be sent to user-specified email
address.
SysLog Server
Enable Y/N This box must be checked if logging is to be done
in conjunction with a SysLog Server program. For
more on SysLog Server, see Operation &
Maintenance chapter. Not supported in BRI 5.02c
software.
IP Address n.n.n.n
for n=
0-255 IP address of computer, connected to voip
network, on which SysLog Server program is
running. Not supported in BRI 5.02c software.
Port 514 Logical port for SysLog Server. 514 is commonly
used. Not supported in BRI 5.02c software.
Online Statistics
Updation Interval integer Set the interval (in seconds) at which logging
information will be updated. Not supported
in BRI 5.02c software.