Multi-Tech Systems MULTIVOIP MVP-2410 User Manual
Page 425
MultiVOIP User Guide
Operation & Maintenance
425
4. The Password screen will appear. If you intend to use the FTP Server
function that is built into the MultiVOIP, enter a user name. (A User Name is
not needed to access the local Windows GUI, the web browser GUI, or the
commands in the Program group.) Type your password in the Password
field of the Password screen. Type this same password again in the
Confirm Password field to verify the password you have chosen.
NOTE: Be sure to write down your password in a convenient but
secure place. If the password is forgotten, contact MultiTech
Technical Support for advice.
Click OK.
5. A message will appear indicating that a password has been set successfully.
After the password has been set successfully, the MultiVOIP will re-boot
itself and, in so doing, its BOOT LED will light up.