Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 201)

MultiVOIP User Guide Technical Configuration (Analog/BRI)
201
ISDN-BRI Telephony Parameters
(for MVP-410ST/810ST)
The following parameters must be known about the PBX or telco central office
equipment to which the analog MultiVOIP will connect:
➼ ISDN-BRI Phone Parameters
Ask phone company or
telecom manager.
Needed for:
MVP810ST
MVP410ST
ISDN-BRI Telephony Interface Parameters:
Record them for this VOIP Site
#
• In which country is this voip installed?
• Which operator (switch type) is used?
• What type of line coding use required,
A-law or u-law?
• Determine which BRI ports will be network side and
which BRI ports will be terminal side.
Write down the values for these telephony parameters (whether analog or
ISDN-BRI). You will need to enter these values in the “Interface” screen
(analog) or “ISDN Parameters” screen (ISDN-BRI) in the Configuration
section of the MultiVOIP software.