Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 554)

Call States/Reasons MultiVOIP User Guide
554
Call Reasons Listing (cont’d)
No State Description
35 App. Timeout The call was disconnected because of a
timeout on waiting for an application reply.
36 call cannot complete-
missing line hunting
addresses The call cannot be completed because no
application Line Hunting addresses were
supplied when the application Line Hunting
mode was on.
37 Additional Address
Complete The Additional Address information
exchange has been completed.
38 Additional Address The Additional Address procedure (digit
collection) is in progress.
39 GK Connect Call The Gatekeeper has connected to the call as
the destination, forming a one-legged call.
This reason accompanies the Wait Dest
Connect state when the application replies
to Setup Arrived with the Send Connect To
Orig reply.
40 GK Initiated Call This reason accompanies the Address
Resolution and Connected states to indicate
a one-legged call initiated from the
Gatekeeper by the application.
41 Unknown Reason unknown