Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 403)

MultiVOIP User Guide Operation & Maintenance
403
ISDN BRI Statistics: Field Definitions
(continued)
Field
Name Values Description
Switch Information:
TEI Assignment
TEI 0 through
TEI 7 0-63 (point-to-point
assignments )
64-126 (automatic
assignments)
Displays the value for each TEI assigned to
the BRI port. The TEI (Terminal Endpoint
Identifier) uniquely identifies each device
connected to the ISDN physical layer.
Switch Information:
D-Channel Information
Tx Packets 0 to 4294967295 Shows the number of packets transmitted on
the channel. When the value exceeds
4294967295 packets, it will reset to zero
and continue counting.
Rx Packets 0 to 4294967295 Shows the number of packets received on
the channel. When the value exceeds
4294967295 packets, it will reset to zero
and continue counting.
Switch Information:
SPID 0
(SPID 0
number) numeric,
3 to 20 digits A SPID (Service Profile Identifier) is
assigned by the ISDN provider and
pertains to one channel of the BRI
interface (port), in this case channel 0.
The SPID identifies an ISDN terminal
uniquely. The SPID associates a set of
services (features) with the terminal.
(In Terminal mode the provider is a
telco or PBX. In Network mode
MultiVOIP is the provider.) A SPID is
only used when the “Country” field is
set to “USA” in the
ISDN BRI
Parameters screen.
Status Not Checked,
Correct,
Incorrect Indicates whether SPID0 is correct,
incorrect, or not being checked.