Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 301)

MultiVOIP User Guide T1 PhoneBook Configuration
301
Remember that the initial MVP2400/2410 setup must be done locally using the
MultiVOIP program. However, after the initial configuration is complete, all
of the MVP2400/2410 units in the VOIP system can be configured, re-
configured, and updated from one location using the MultiVoipManager
software program.
T1 Phonebook Examples
The following example demonstrates how Outbound and Inbound PhoneBook
entries work in a situation of multiple area codes. Consider a company with
offices in Minneapolis and Baltimore.
3 Sites, All-T1 Example
Notice first the area code situation in those two cities: Minneapolis’s local
calling area consists of multiple adjacent area codes; Baltimore’s local calling
area consists of a base area code plus an overlay area code.
Mpls
612
NW
Suburbs
763
St. Paul
& Suburbs
651
SW Suburbs
952
5
Company
VOIP/PBX
SIte
5
Baltimore
410
Baltimore/
Outstate MD
Overlay
443
Company
VOIP/PBX
SIte
...