Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 414)

Operation & Maintenance MultiVOIP User Guide
414
Download Firmware transfers the firmware (including the H.323 protocol
stack) in the PC’s MultiVOIP directory into the nonvolatile flash memory of
the MultiVOIP.
Download Factory Defaults sets all configuration parameters to the standard
default values that are loaded at the MultiTech factory.
Upgrade Software implements both the Download Firmware command and
the Download Factory Defaults command.
Downloading Firmware
1. The MultiVoip Configuration program must be off when invoking the
Download Firmware command. If it is on, the command will not work.
2. To invoke the Download Factory Defaults command, go to Start |
Programs | MVP____ x.xx | Download Firmware.