Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 49)

MultiVOIP User Guide Quick Start Instructions
49
Phone/IP Details *Absolutely Needed* (cont’d)
Gather Telephone Information (E1)
➼ E1 Phone Parameters
Ask phone company or
PBX maintainer.
Info needed to operate:
MVP3010
E1 Telephony Parameters:
Record for this VOIP Site
#
• Which frame format is used? Double Frame _____
MultiFrame w/ CRC4 _____
MultiFrame w/ CRC4 modified _____
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
internal or external clocking? _________________
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
• Which line coding is used? AMI ___ or HDB3 ___
• Pulse shape level?: (most commonly 0 to 40 meters)
Gather Telephone Information (Analog)
➼ Analog Phone Parameters
Ask phone company or
telecom manager.
Needed for:
MVP810
MVP410
MVP210
MVP130
Analog Telephony Interface Parameters:
Record for this VOIP Site
#
• Which interface type (or “signaling”) is used?
E&M _____ FXS/FXO _____
• If FXS, determine whether the line will be used for a
phone, fax, or KTS (key telephone system)
• If FXO, determine if line will be an analog PBX
extension or an analog line from a telco central office
• If E&M, determine these aspects of the E&M trunk
line from the PBX:
• What is its Type (1, 2, 3, 4, or 5)?
• Is it 2-wire or 4-wire?
• Is it Dial-Tone or Wink?