Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 534)

T1/E1 Expansion Cards MultiVOIP User Guide
534
Operation
The MVP2410/3010 front panel has two sets of identical LEDs. In the
MVP2410/3010 without an expansion card, only the left-hand set of LEDs is
functional. However, when the MultiVOIP unit has been upgraded with an
MVP24-48 or MVP30-60 expansion card, the right-hand set of LEDs will also
become active.
Remember that the expansion card must be configured as though it were
simply another complete MultiVOIP unit: it requires its own T1/E1 line; it
requires its own connection to a computer running the MultiVOIP
configuration software. All of the procedures and operations that apply to the
original motherboard of the MVP2410/3010 will also apply to the expansion
card. See applicable User Guide chapters for details.