Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 73)

MultiVOIP User Guide Quick Start Instructions
73
Phonebook Tips
Preparing the phonebook for your voip system is a complex task that, at first,
seems quite daunting. These tips may make the task easier.
1. Use Dialing Patterns, Not Complete Phone Numbers . You will not
generally enter complete phone numbers in the voip phonebook. Instead,
you’ll enter “destination patterns” that involve area codes and other digits. If
the destination pattern is a whole area code, you’ll be assigning all calls to that
area code to go to a particular voip that has a unique IP address. If your
destination pattern includes an area code plus a particular local phone exchange
number, then the scope of calls sent through your voip system will be narrowed
(only calls within that local exchange will be handled by the designated voip,
not all calls in that whole area code). In general, when there are fewer digits in
your destination pattern, you are asking the voip to handle calls to more
destinations.
2. The Four Types of Phonebook Digits Used. Important!
“Destination patterns” to be entered in your phonebook will generally consist
of:
(a) calling area codes,
(b) access codes,
(c) local exchange numbers, and
(d) specialized codes.
Although voip phonebook entries may look confusing at first, it’s useful to
remember that all the digits in any phonebook entry must be of one of these
four types.
(a) calling area codes . There are different names for these around the world:
“area codes,” “city codes,” “country codes,” etc. These codes, are used when
making non-local calls. They always precede the phone number that would be
dialed when making a local call.