Phonebook example, Quick start instructions multivoip user guide 76, Flagstaff office – Multi-Tech Systems MULTIVOIP MVP-2410 User Manual

Page 76: Santa fe office, Boise office, One common situation

Advertising
background image

Quick Start Instructions

MultiVOIP User Guide

76

Phonebook Example

Flagstaff Office

204.16.49.75

8-Channel

Analog VoIP

(MVP810)

PSTN

PBX System.

Main Number:

777-5600

30 extensions

Area: 520

Santa Fe Office

PBX System.

Main Number:

444-3200

40 extensions

PSTN

204.16.49.74

8-Channel

Analog VoIP

(MVP810)

Area: 505

PBX System.

Main Number:

333-2700

204.16.49.73

24-Channel

Digital VoIP

(MVP2410)

PSTN

Boise Office

Area: 208

90 extensions

IP

Network

Each

Outbound Phonebook

contains two

pairs of entries, two entries for each
remote site. Whenever an out-of-tow n
employee dials a 12-digit number
beginning w ith the listed 5-digit
destination pattern (9+1+area code) of
another company location, the PBX
hands the call to the voip system. The
local voip strips off the “ 9” and directs
the call to the IP address of the remote
voip. The remote voip receives the call
and hands it to its PBX. The PBX then
completes the call to the PSTN .

The one-digit

Outbound

destination

patterns pertain to 3-digit calling
between company employees.

Inbound Phonebook

One Common Situation

V oip Example. This company has offices in three
different cities. The PBX units all operate alike.
N otably, they all give access to outside lines using
“ 9.” They all are ‘smart’ enough to identify voip calls
w ithout using a special access digit (“ 8” is used in
some systems). Finally, the system operates so that
employees in any office can dial employees in any
other office using only three digits. Here are the
phonebooks needed for that system.

Each

Inbound Phonebook

contains

tw o entries. The first entry (4 digits)
specifies how incoming calls from the
other voip sites will be handled if
they go out onto the local PSTN.
Essentially, all those calls come to the
receiving voip w ith a pattern
beginning with

1+area code

. The local

voip removes those four digits
because they aren’t needed w hen
dialing locally. The local voip
attaches a “ 9” at the beginning of the
number to get an outside line. The
PBX then completes the call to the
PSTN .

The second

Inbound

Phonebook entry

(8 digits) is for receiving calls from
company employees in the other two
cities. The out-of-town employee
simply dials 3 digits. The first of the
three digits is uniquely used at each
site and so acts as a destination
pattern (Boise extensions are 7xx,
Santa Fe extensions 2xx, Flagstaff
extensions 6xx).

A s the remote voip sends out the call,
it automatically attaches all of the
foregoing digits that would normally
have to be dialed using the PSTN .

The local (receiving) voip sees the
extended pattern in its Inbound
Phonebook and so strips off the long
telltale pattern of digits needed for 3-
digit calling. It must finally add back
the last digit before handing the call
to the PBX, w hich completes the call
to a specific extension.

Advertising
This manual is related to the following products: