10 jog frequency [p15] [p16, 11 [run] key rotation direction selection [p17, 10 jog frequency – MITSUBISHI ELECTRIC FR-S520 User Manual

Page 76: Key rotation direction selection

Advertising
background image

67

2

2

.3.10

Jog frequency

To perform jog operation in the
external operation mode, choose
the jog operation function in input
terminal function selection, turn on
the jog signal, and use the start
signal (STF, STR) to make a start
or stop.
For the type having the RS-485
communication function, you can
choose the jog operation mode
from the parameter unit (FR-PU04)
and perform jog operation using

Output frequency (Hz)

ON

Pr.20

Forward

rotation

Pr.16

Jog frequency
setting range

Pr.15

JOG signal

STF signal

ON

the

FWD

or

REV

key.

(Can be read as the basic parameters when the FR-PU04 is connected.)

Set the frequency and acceleration/deceleration time for jog operation.

Parameter

Name

Factory Setting Setting Range

Remarks

15

Jog frequency

5Hz

0 to 120Hz

16

Jog acceleration/
deceleration time

0.5s

0 to 999s

Setting is enabled when
Pr. 30 = "1".

CAUTION

In S-shaped acceleration/deceleration pattern A, the acceleration/deceleration
time is the period of time required to reach Pr. 3 "base frequency", not Pr. 20
"acceleration/deceleration reference frequency".

The acceleration time and deceleration time cannot be set separately for jog
operation.

The value set in Pr. 15 "jog frequency" should be equal to or greater than the
Pr. 13 "starting frequency" setting.

Assign the jog signal using any of Pr. 60 to Pr. 63 (input terminal function
selection).

Related parameters

Assignment of jog signal to terminal

Pr. 60 to Pr. 63 (input terminal function selection)

(refer to page 88)

Acceleration/deceleration pattern S-shaped acceleration/deceleration A

Pr. 29 "acceleration/deceleration pattern" (refer to page 71)

2

.3.11

RUN

key rotation direction selection

Used to choose the direction of rotation by operating the

RUN

key of the

operation panel.

Parameter

Name

Factory

Setting

Setting

Range

Remarks

17

RUN key rotation
direction selection

0

0, 1

0: Forward rotation
1: Reverse rotation

Setting is enabled
when Pr. 30 = "1".

Refer to

(page 59)

Refer to

,

(page 62)

Advertising
This manual is related to the following products: