3 at*ealr ericsson audio line request – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 102
Owner’s Manual
Rev 1.0
Page 102 of 102
•_
Examples
AT*E2APR=?
*E2APR= (0-4),(0-2),(0-2)
OK
Current default profile is profile 0:
AT*E2APR?
*E2APR: 0
OK
Set audio profile now used to profile 1:
AT*E2APR=0,1
OK
Audio profile 1 settings:
AT*E2APR=1,1
*E2APR: 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
OK
Copy audio profile 1 to audio profile 2:
AT*E2APR=2,1,2
OK
Reset audio profile 1 with factory default - this also resets the current audio
paths to the new profile as 1 is currently used:
AT*E2APR=3,1
OK
Sets profile number 1 as the default when modem is powered on:
AT*E2APR=4,1
OK
4.3 AT*EALR Ericsson Audio Line Request
Description Command Possible
Responses
Request the audio lines
(ATMS,AFMS)
AT*EALR=<mode>
[,<activation>
[,<aud_status>]]
•_ *EALR: <mode>,
<activation>,<resp>
•_ OK
•_ ERROR
Show the current
setting
AT*EALR? *EALR:
<mode>,<activation>,
<resp>