Sony Ericsson TT4031 (SE-GM29) - Manual (Page 159)

Owner’s Manual Rev 1.0 Page 159 of 159
7 BER > 15.0 %
<c1> Description
Integer Path Loss criterion parameter for neighbour cells. The MS
calculates this parameter, in idle mode, to decide if the
cell is suitable to camp on. After the calculation the
criterion is C1 > 0. See GSM 05.08
<c2> Description
Integer Cell reselection parameter for neighbour cells. This
parameter shall optimise the selected cell reselection
<ta> Description
0-63 According to GSM 04.18 V8.6.0, the coding of the timing
advance value is the binary representation of the timing
advance in bit periods; 1 bit period = 48/13 ìs. <ta> is
the integer representation of the timing advance in
binary format
64-255 Reserved
<tn> Description
0-7 Its value indicates the time slot number in a traffic
channel
11.3 AT*E2SPN M2M Service Provider Indication
Description Command Possible Responses
Request service provider
indication
AT*E2SPN
•_ *E2SPN: <spi>
•_ +CME ERROR: <err>
Show if the command is
supported
AT*E2SPN=? •_ OK
•_ ERROR
Causes the MS to return the service provider name stored in the SIM card
(<spi> parameter). The text will consist of a maximum of 16 bytes
containing the service provider name stored in the EF
SPN
file in the SIM card
(see GSM 11.11). ERROR is returned if the field is not present on the SIM.