21 at+cmer mobile equipment event reporting – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 84
Owner’s Manual
Rev 1.0
Page 84 of 84
•_ ERROR
Show if the command is
supported
AT+CMEE=?
•_ +CMEE: (list of
supported <n>s)
•_ OK
•_ ERROR
Disables or enables the use of result code +CME ERROR: <err> as an
indication of an error relating to the functionality of the ME. When enabled,
ME related errors cause +CME ERROR: <err> final result code instead of the
regular ERROR final result code. ERROR is returned normally when error is
related to syntax, invalid parameters, or TA functionality. For more
information, refer to “+CME ERROR (Mobile Equipment Error Code)”.
<n> Description
0
Disable +CME ERROR: <err> result code and use ERROR
instead. Default value
1
Enable +CME ERROR: <err> result code and use numeric
<err> values
2
Enable +CME ERROR: <err> result code and use verbose
<err> values
3.21 AT+CMER Mobile Equipment Event Reporting
Description Command
Possible
Responses
Set phone activity
status
AT+CMER=[<mode>
[,<ind>[,<bfr>]]]
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Read the current
setting
AT+CMER?
•_ +CMER:
<mode>,<ind>,<bfr>
•_ OK
•_ ERROR
Test if the
command is
supported
AT+CMER=?
•_ +CMER: (list of supported
<mode>s), (list of supported
<ind>s), (list of supported
<bfr>s)
•_ OK
•_ ERROR