Sony Ericsson TT4031 (SE-GM29) - Manual (Page 195)

Owner’s Manual Rev 1.0 Page 195 of 195
<toda> Description
String type GSM 04.11 TP-Destination- Address Type-of-Address
octet in integer format (when first character of <da> is
+(IRA 43) default is 145, otherwise default is 129
Note!_
<index> Description
Integer type Value in the range of location numbers supported by the
associated memory
Note!_
13.7 AT+CMGS Send Message
PDU Mode
Description Command Possible Responses
Send message AT+CMGS=<length>
<CR>
PDU is given<ctrl-
Z/ESC>
•_ +CMGS:
<mr>[,<ackpdu>]
•_ +CMS ERROR: <err>
•_ OK
•_ ERROR
Show if the command is
supported
AT+CMGS=? •_ OK
•_ ERROR
Sends a message from a TE to the network (SMS-SUBMIT). Message
reference value <mr> is returned to the TE on successful message delivery.
Optionally, when AT+CSMS <service> value is 1 and there is network
support, <ackpdu> is returned. Values can be used to identify message upon
unsolicited delivery status report result code. If sending fails in a network or
an ME error, final result code +CMS ERROR: <err> is returned. This
command is abortable.
<length> must indicate the number of octets coded in the TP
layer data unit to be given (i.e. SMSC address octets are
excluded).
The TA shall send a four character sequence
<CR><LF><greater_than><space> (IRA 13, 10, 62, 32) after
command line is terminated with <CR>; after that PDU can be
given from TE to ME/TA.