26 at+crc cellular result code – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 91
Owner’s Manual
Rev 1.0
Page 91 of 91
Read current setting
AT+CR?
•_ +CR: <mode>
•_ OK
•_ ERROR
Test if the command is
supported
AT+CR=?
•_ +CR: (list of
supported <mode>s)
•_ OK
•_ ERROR
Enables or disables display of intermediate bearer capability reports during
the handshake phase.
<mode> Description
0
Disable reporting. Default value
1 Enable
reporting
Intermediate Result Codes:
+CR: <serv>
3.26 AT+CRC Cellular Result Code
Description Command Possible
Responses
Set Cellular Result Code
option
AT+CRC=[<mode>]
•_ OK
•_ ERROR
Show the current
setting
AT+CRC?
•_ +CRC: <mode>
•_ OK
•_ ERROR
Show if the command is
supported
AT+CRC=?
•_ +CRC: (list of
supported <mode>s)
•_ OK
•_ ERROR
Command controls whether or not;
the extended format of incoming call indication;
or GPRS network request for PDP context activation;
or notification for VBS/VGCS calls is used.