Sony Ericsson TT4031 (SE-GM29) - Manual (Page 131)

Owner’s Manual Rev 1.0 Page 131 of 131
0 TA/ME shall calculate a proper number of receive
timeslots from currently selected fixed network user rate
(<speed> parameter from +CBST command, and
<codings>, and <wRx> (or <maxRx> from +CHSD
command if <wRx>=0)
1 Wanted air interface user rate is 9.6 kbit/s
2 Wanted air interface user rate is 14.4 kbit/s
3 Wanted air interface user rate is 19.2 kbit/s
4 Wanted air interface user rate is 28.8 kbit/s
Note!_
<wRx> Description
0 TA/ME shall calculate a proper number of receive
timeslots from currently selected <wAiur> and
<codings> See note below
1 Wanted number of receive timeslots is 1
2 Wanted number of receive timeslots is 2
Note!_
<topRx> Description
0 Indicates that the user is not going to change <wAiur>
and /or <wRx> during the next call
1 Top value for <wRx> that user is going to request during
the next established non-transparent HSCSD call is 1
2 Top value for <wRx> that user is going to request during
the next established non-transparent HSCSD call is 2
Note!_
<codings> Description
4 Indicates that the accepted channel coding for the next
established non-transparent HSCSD call is 9.6 kbit/s only
Note!_
7.4 AT+CHSR HSCSD Parameters Report
Description Command Possible Responses