Sony Ericsson TT4031 (SE-GM29) User Manual
Page 117
Owner’s Manual
Rev 1.0
Page 117 of 117
Test if the
command is
supported
+CGDCONT=?
•_ +CGDCONT: (range of
supported <cid>s),
<PDP_type>,,,(list of
supported <d_comp>s),
(list of supported <h_comp>s)
[,(list of supported <pd1>s)
[,…[,(list of supported
<pdN>s)]]]
[<CR><LF>+CGDCONT:
(range of supported <cid>s),
<PDP_type>,,,(list of
supported <d_comp>s),
(list of supported <h_comp>s)
[,(list of supported
<pd1>s)[,…[,(list of supported
<pdN>s)]]] [...]]
•_ OK
•_ ERROR
Specifies PDP context parameter values for a PDP context identified by the
(local) context identification parameter, <cid>.
<cid> Description
Integer type
(PDP Context Identifier) a numeric parameter which
specifies a particular PDP context definition. The
parameter is local to the TE-MS interface and is used in
other PDP context-related commands. The range of
permitted values (minimum value = 1) is returned by the
test form of the command
1-10 Supported
values.
Ericsson specific
<PDP_type> Description
IP
Internet Protocol (IETF STD 5)
<APN> Description
String type
(Access Point Name) a string parameter which is a logical
name that is used to select the GGSN or the external
packet data network. If the value is null or omitted, then
the subscription value will be requested
<PDP_address> Description