11 at*ecam ericsson call monitoring – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 77
Owner’s Manual
Rev 1.0
Page 77 of 77
3.11 AT*ECAM Ericsson Call Monitoring
Description Command Possible
Responses
Set Call Monitoring on
or off
AT*ECAM=<onoff>
•_ OK
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Read the current status
for Call Monitoring
AT*ECAM?
•_ *ECAM: <onoff>
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Test if the command is
supported
AT*ECAM=?
•_ *ECAM: list of
supported <onoff>s
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
This command activates or deactivates the call monitoring function in the ME.
When this log function is activated in the ME, the ME informs about call
events, such as incoming call, connected, hang up etc.
It is preferable that the current status shall always be sent with result code
*ECAV when activating the log function. The purpose of this is two fold:
to gather relevant information for the call log in a TE;
to make it possible for the TE to display call state information for
an ongoing call.
<onoff> Description
0
The call log function is disabled (off). Default value
1
The call log function is enabled (on)
•_
Examples
AT*ECAM?
*ECAM: 0
AT*ECAM=1
OK