Sony Ericsson TT4031 (SE-GM29) - Manual (Page 173)

Owner’s Manual Rev 1.0 Page 173 of 173
Test command gives the current value of the <switch> parameter, informing
if the indicator is enabled or disabled.
The ciphering indicator feature may be disabled by the home network
operator setting data in the “administrative data” field (EFAD) in the SIM as
defined in GSM 11.11.
If this feature is not disabled by the SIM, then whenever a connection is in
place, which is or becomes deciphered, an indication is given via the
unsolicited result code *ECPV:<ciphering>.
<switch> Description
1 Ciphering indication is on. The unsolicited result code
*ECPV is sent anytime the communication is unsecured
and when it becomes secure again
0 Ciphering indication is off. Disable the ciphering
indication, *ECPV is not sent
Unsolicited Result Codes:
*ECPV: <ciphering>. Sent only when <switch> is set to 0.
Unsolicited Result Codes
*ECPV - Ciphering Indicator
SYNTAX - Unsolicited Result code
Description Response When
Set command informs
the TE when a
communication is
unsecured due to the
fact that the network is
not enciphering the
communication
*ECPV: <ciphering> When AT*ECPI enables it,
the *ECPV:<ciphering> is
sent during a connection
whenever the
communication is not
enciphered. If a connection
becomes secure after that,
the *ECPV:<ciphering> is
sent again to indicate that
now the communication is
enciphered
<ciphering> Description
0 The connection is secured. The network enciphers the
communication
1 The connection is unsecured. The network does not
encipher the communication