12 at+ifc dte-dce local flow control – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 148
Owner’s Manual
Rev 1.0
Page 148 of 148
Read the current
setting
AT+ICF?
•_ +ICF:
<format>,<parity>
•_ OK
•_ ERROR
Show if the command
is supported
AT+ICF=?
•_ +ICF: (list of
supported
<format>s), (list of
supported <parity>s)
•_ OK
•_ ERROR
This extended-format compound parameter is used to determine the local
serial port start-stop (asynchronous) character framing used by the DCE to
accept DTE commands, and while transmitting information text and result
code, if this is not automatically determined; (Not supported) +IPR=0
forces +ICF=0 (see +IPR).
<format> Description
3
8 Data 1 Stop. Default value
<parity> Description
3
Space. Default value
10.12 AT+IFC DTE-DCE Local Flow Control
Description Command Possible
Responses
Defines DTE-DCE local
flow control
AT+IFC=[<by_te>,
[<by_ta>]]
•_ OK
•_ ERROR
Read the current setting AT+IFC? +IFC:
<by_te>,<by_ta>
Show if the command is
supported
AT+IFC=?
+IFC: (list of supported
<by_te>s,<by_ta>s)
Defines the flow control between the modem and the computer when in on-
line data mode.
No flow control is enabled in any of the command modes.