Sony Ericsson TT4031 (SE-GM29) - Manual (Page 83)

Owner’s Manual Rev 1.0 Page 83 of 83
Integer type Value shall be in range of corresponding <descr>
<descr> Description
“signal” Signal quality (0-5)
“service” Service availability (0-1)
“sounder” Sounder activity (0-1)
“message” Message received (0-1)
“call” Call in progress (0-1)
“roam” Roaming indicator (0-1)
“sms full” A short message memory storage in the MT has become
full (1), or memory locations are available (0); i.e. the
range is (0-1)
3.19 AT+CLAC List all available AT Commands
Command Possible Responses
+CLAC <AT Command1> [<CR> <LF> <AT Command2>[…]]
+CME ERROR: <err>
+CLAC=? +CME ERROR: <err>
Causes the ME to return one or more lines of AT commands. This command
has the same functionality as AT*.
NOTE! - This command only returns the AT commands
that are available to the user.
3.20 AT+CMEE Mobile Equipment Error
Description Command Possible Responses
Request GSM Mobile
Equipment Error Control
AT+CMEE=[<n>]
•_ OK
•_ ERROR
Read the command AT+CMEE?
•_ +CMEE: <n>
•_ OK