Audio – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 95
Owner’s Manual
Rev 1.0
Page 95 of 95
Audio
AT*E2EAMS and AT*E2APR are new commands that replace the funtionality
offered by the *EALR, *EAMS, *EARS and *ELAM commands. Use the new
commands in new applications. The old commands are included for
compatibility.
4.1 AT*E2EAMS Ericsson M2M Audio Profile Modification
Description Command
Possible
Responses
Request
operation
with audio
profile
AT*E2EAMS=
<op>[,<TxPGA>,
<RxPGA>,<SideToneGain>,
<AuxInGain>,<MicInGain>,
<TxAGC>,<Volume>,
<MaxVolume>,<MicPath>,
<SpkPath>,<TxPCM>,
<RxPCM>,<HFAlgorithm>,
<LocalAudio>,<TxGainLow>,
<MicVolt2V>,<SideTone>,
<NoiseRed>,<EchoCancel>,<
AnalogRing>,][,<val>]]
•_ ERROR
•_ OK
Display set
profile
AT*E2EAMS?
•_ *E2EAMS: <TxPGA>,
<RxPGA>,
<SideToneGain>,
<AuxInGain>,
<MicInGain>,
<TxAGC>,<Volume>,
<MaxVolume>,
<MicPath>,<SpkPath>,
<TxPCM>,<RxPCM>,
<HFAlgorithm>,
<LocalAudio>,
<TxGainLow>,
<MicVolt2V>,
<SideTone>,<NoiseRed>,
<EchoCancel>,
<AnalogRing>
OK
•_ ERROR
Show if the
command is
supported
AT*E2EAMS=?
•_ *E2EAMS:
(list of supported <op>s)
•_ ERROR
This command allows the modification and configuration of the current audio
profile. An audio profile is a set of data which uniquely defines the way in
which the audio paths, gains, DSP algorithms and switch setting are