Sony Ericsson TT4031 (SE-GM29) - Manual (Page 143)

Owner’s Manual Rev 1.0 Page 143 of 143
10.6 ATE Command Echo
Description Command Possible Responses
Request Command Echo ATE[<value>]
ATE=[<value>]
•_ OK
•_ ERROR
Show the current
setting
ATE? <value>
Show if the command is
supported
ATE=? E: (list of supported
<value>s)
The setting of this parameter determines whether or not the DCE echoes
characters received from the DTE during command state and online
command state.
<value> Description
0 DCE does not echo characters during command state and
online command state
1 DCE echoes characters during command state and online
command state. Default value
10.7 ATV DCE Response Format
Description Command Possible Responses
Set DCE response
format
ATV[=]<value> •_ OK
•_ ERROR
Read the current setting ATV? V: <value>
Show if the command is
supported
ATV=? V: (list of supported
<value>s)
Select either descriptive or numeric response codes. The ATV command sets
the verbose numeric response codes and strips off the <S3><S4> additions
to the command response.
<value> Description