Sony Ericsson TT4031 (SE-GM29) - Manual (Page 222)

Owner’s Manual Rev 1.0 Page 222 of 222
Show if the
command is
supported
AT+CSMP=?
•_ +CSMP: (List of supported
<fo>s), (list of supported
<vp>s), (list of supported
<pid>s), (list of supported
<dcs>s)
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Used to select values for additional parameters needed when SM is sent to
the network or placed in a storage when text format message mode is
selected. It is possible to set the validity period starting from when the SM is
received by the SMSC (<vp> is in range 0… 255). The <pid> parameter
identifies the higher protocol being used or indicates interworking with a
certain type of telematic service and <dcs> determines the way the
information is encoded as in GSM 03.38.
<fo> Description
0-255 Depending on the command or result code: first octet of
GSM 03.40 SMS-DELIVER, SMS-SUBMIT (default value
17),SMS-STATUS-REPORT, or SMS-COMMAND (default
value 2) in integer format
<vp> Description
0-143 (TP-VP+1) x 5 minutes (i.e 5 minutes intervals up to 12
hous)
144-167 12 hours + ((TP_VP-143) x 30 minutes)
168-196 (TP-VP-166) x 1 day
197-255 (TP-VP-192) x 1 week
<pid> Description
0-255 Protocol Identifier in integer format. Default value is 0,
according to 07.05 section 9.2.3.9
<dcs> Description
0-255 Data coding scheme. See GSM 03.38. UCS2 and
compressed text not supported