3 at*e2stkd m2m stk display text – Sony Ericsson TT4031 (SE-GM29) User Manual
Page 228
Owner’s Manual
Rev 1.0
Page 228 of 228
The unsolicited result codes defined in sections below can be received.
15.3 AT*E2STKD
M2M STK Display Text
Description Command
Possible
responses
Answer to the
reception of
DISPLAY TEXT
AT*E2STKD=<answer
>
•_ +CME ERROR <err>
•_ OK
•_ ERROR
Test if the
command is
supported
AT*E2STKD=?
•_ *E2STKD:
(list of supported <answer>)
•_ +CME ERROR <err>
•_ OK
•_ ERROR
The ME passes the parameters within DISPLAY TEXT command to the
external application by means of the unsolicited result code *E2STKD.
Command AT*E2STKD allows the external application to send the appropriate
answer after receiving the unsolicited result code, and before the timeout
expires.
If Answer command is sent once the timeout expires, an ERROR response is
generated.
Test command returns the list of supported <answer>. Values follow GSM
11.14 standard
<answer> Description
0
OK.
Performed as required: the text was displayed and
cleared as requested. It corresponds to ‘00’ Command
performed successfully, described in the GSM standard
1 Failed.
User Terminated Session: the text was displayed as
requested and the user wants to end the proactive
session. It corresponds to ‘10’ Proactive session
terminated by the user, described in the GSM standard
2
Failed.
User requests backwards move: the text was displayed
as requested and the user wants to go backwards in the
session. It corresponds to ‘11’ Backward move in the
proactive SIM session requested by the user
3 Failed.
No response from user: the text was displayed, and
although the clear condition was “Wait for user to clear”,
the user did not react. It corresponds to ‘12’ no response
from user